Testimonials

Amazing Machine!

The SC3265 chipper/shredder is easy to use and move around to the brush that you are chipping. It does not take up a lot of space in the garage. Great tool for chipping up limbs into mulch!

Simmey B
Repton, AL


 

Products

CH611DH 6 Inch Chipper

Illustrations may include optional equipment and accessories and may not include all standard equipment.

MSRP $19,995


Invest in the chipper that's loaded with new standard features to make your job easier. Our new breed of chipper can handle branches up to 6 inches in diameter, with the ability to chip the toughest brush with ease.

The 26 x 1 inch thick, 165 pound dynamically-balanced disc with cantilever design reduces wrapping while utilizing 4-reversible chipper blades, and an adjustable 4-sided anvil.

Features include a 6.7 inch rectangular discharge chute, and a live hydraulic feed system with a variable speed feed roller with instant reverse. Our newly developed "try again" feed system automatically retries feeding limbs. The feed sensor is factory installed and standard equipment on these 6 inch chippers. The feed roller is 15 inches in diameter, containing 10 knife blades for enhanced powerful feeding. The discharge chute extends to the end of the hitch for efficient loading and quickly rotates 360 degrees with ease. The 6 inch chipper is available with a choice of gas or diesel engines. All models have a 6.5 x 13.5 inch feed opening with a wide open feed chute measuring 36 x 35 inches.

The triple banded belt drive provides a better transfer of power. The Bear Cat 6 inch Chipper also features a telescopic tongue with 2 inch ball coupler, torsion axle suspension, adjustable jack stand with wheel and adjustable rear stabilizer. The 60 inch wide trailer is ideal for tight roads, storage and maneuverability.


Dimensions
Chipper Capacity (in)
Diesel
L x W x H (in)
143 x 59 x 93
Weight (lbs)
2300
Chipper Disc
Cantilever 26x1/165 lbs., rotates at 1,700 rpm
Chipper/Shredder
Chipper Blades
4 reversible heat treated chipper blades with 4-sided adjustable anvil
Feed System
Hydraulic Feed
Feed Sensor
Smart Feed
Hopper
33 x 37
Chipper Disc Weight (lbs)
165
Engine
Fuel Type
Diesel
Displacement
1.1 Liter
Drive Belt
Triple Banded
Start Type
Electric Start
Make
Kubota Diesel
Fuel Capacity
9 gal.
Trailer
Towable
Yes
Tires
P215-75R15
Wheel Base (in)
50

How difficult is it to perform maintenance on the machine?
ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
How long will the chipper blades last?
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed machines will have longer blade life.
What are these chippers designed for?
The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches, and other organic material. The typical application for this product group is anywhere from light to commercial to municipalities, and/ or rental.
What type of chippers are available?
ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has a hydraulic driven feed roller to efficiently feed branches to the chipper disc.
When should I buy a gravity feed machine?
If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs.
When should I buy a hydraulic feed machine?
If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.