CH8993H

CH8993H

9-inch Chipper

POWER AND EFFICIENCY COME STANDARD. 

Crary® Bear Cat® engineers and manufactures the strongest lineup of towable Chippers right here in the USA. With a wide range of models, there is sure to be one that fits your needs. On top of this is a bestinclass warranty.

Category:

This turntable Chipper with a 9” max capacity and infeed opening from Crary® Bear Cat® provides all the features you need to get your work done!

The 360 degree rotating base allows the chipper infeed to be rotated to the work. An integrated smart feed system allows efficient use of the engine horsepower. A swing-away door covers the belts and hydraulic system during operation, and opens quickly for service.

2″ coupler standard.

Battery sold separately. See Battery Usage Chart for details.

Engine

  • Make: Briggs & Stratton Vanguard®
  • Gross HP*: 35
  • Displacement: 993cc
  • Starter Type: Electric

*Horsepower rating based on Engine Manufacturer at time of manufacture

Dimensions

  • Max Chipping Capacity: 9″ Max capacity and infeed opening
  • Chute Opening: 31″ x 31″
  • Chute Throat: 9″ x 9″
  • Rotor Size/Weight: 30″ x 1.25″/275 lbs.
  • L x W x H: 140″ x 79″ x 102″

Chipper

  • Chipping Blades: 4 Reversible Heat-treated
  • Drive Type: Triple-Banded Belt
  • Feed System: Hydraulic
  • Auto Feed: Yes
  • Hydraulic Controller: DDC System
  • Weight: 2,252 lbs.

Trailer

  • Towable: Yes
  • Wheel Base: 69″
  • Wheels/Tires: ST205/75R15

    How difficult is it to perform maintenance on the machine?

    Crary® Bear Cat® products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. 

    How long will the chipper blades last?

    Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed machines will have longer blade life.

    What are these Chippers designed for?

    The Crary® Bear Cat® Chipper is designed to effectively reduce the volume of wood, branches, and other organic material. The typical application for this product group is anywhere from light to commercial to municipalities, and/ or rental. 

    What is the maximum size of material will these machines chip?

    A Crary® Bear Cat® 9” Chipper will chip up to 9 diameter material. 

    What type of Chippers are available?

    Crary® Bear Cat® makes Chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has a hydraulic driven feed roller to efficiently feed branches to the chipper disc. 

    When should I buy a gravity feed machine?

    If you have an infrequent need for a Chipper and time is not a factor, a gravity feed machine will fit your needs.

    When should I buy a hydraulic feed machine?

    If time or efficiency is an issue, a hydraulic feed Chipper allows you to be more productive.

    When should I chip?

    If you don’t plan on composting the material, material is green and stringy or larger than 3/4″ in diameter.

    California Consumers: What is California Proposition 65?

    California’s Proposition 65 entitles California consumers to be made aware of products containing certain chemicals above designated threshold levels, enabling them to make informed decisions prior to purchase. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For additional information visit www.P65Warnings.ca.gov.

x

This website uses cookies

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

I AgreeRead More